Sepuluh Tahun Sebelum Merdeka (Ten Years Before Independence)

The most inspiring documentary on Malaysian politics before Malaysian independence.
Sepuluh Tahun Sebelum Merdeka

Krisis Perlantikan Menteri Besar Terengganu - Detik Bersejarah dalam Politik Malaysia

Lebih 10,000 rakyat menyambut kepulangan DYMM Sultan Mizan Zainal Abidin di Lapangan Terbang Antarabangsa Sultan Mahmud (Kuala Terengganu) sempena menyokong tindakan baginda untuk melantik Datuk Ahmad Said, walaupun menerima desakan hebat dari Perdana Menteri Abdullah Badawi supaya menyambung khidmat bekas menteri besar Idris Jusoh untuk penggal kedua. Salah-guna kuasa oleh Idris Jusoh melibatkan perbelanjaan Wang Ehsan dalam projek yang tidak memberi faedah kepada rakyat Terengganu dikatakan sebagai punca Tuanku menolak perlantikan Idris Jusoh.


Update 13 April 2008: This video shows scenes around the airport officially released by UKOM Terengganu. Many Datuks are also there... but I'm not sure who they are. The part when Tuanku Mizan "melambai-lambai" to the Rakyats really touches me.


Krisis perlantikan menteri besar Terengganu boleh dilihat dalan video ini.


(My personal comments: These are qualities of UMNO leaders in Terengganu (and Malaysia)... shame on you!)

A short stop-over in Hong Hong

I'm unable to write long this time. These are just my personal notes for my future travel to Hong Kong City.

How to go to Hong Kong city from Chek Lap Kok Airport:
1. After exiting arrival hall, head for "Airbus" (with bus logo) sign-board. You can ask tourist information desk after exiting custom check. There're lots of guides and maps there, just take anything you want. I was a little confused when followed the bus sign as there's also "Hotel shuttle bus" heading to "Terminal 2", but don't go for that if you want a cheaper method going to the city.
2. At the airport exit (if you follow the "Airbus" sign), you can see many double-decker bus in-front of you, and there's ticket/information counter on your left.
3. I booked a hostel at Mirador Mansion which is located at Tsim Sha Shui, so buy a ticket route A21 at CitiFlyer counter (left counter). Wait for the bus at A21 waiting area. You can check the location at the information board in front of the bus station. ALWAYS REMEMBER TO BUY RETURN JOURNEY TICKET INSTEAD OF SINGLE JOURNEY TICKET as you'll get discount for the second journey. Single journey ticket would cost HKD35, while return journey ticket would cost HKD55.
4. CityFlyer airport buses are red and yellow colored, just for a note. Make sure to be in front at the queue as you can get better seat in the bus. I would prefer front seat of the second floor of the double-decker bus. When entering the bus, show ticket to the bus driver and put it into the coin box. You can pay directly pay at the box if you don't have ticket (However, I'm not sure how you can get return journey if you do this way). Put your luggage at the luggage area (CCTV monitored), and go get a good seat.
5. Enjoy your journey, as it may take around 40-50 minutes to Hong Kong city (Mong Kok or Tsim Sha Shui area). Tsim Sha Shui is at the 13th stop (number and location name is shown in Cantonese and English at the LED panel inside the bus for each stop). Better get ready to get-off the bus before the bus actually stop at your desired location. I saw a girl shouting "Wai, wait, hold on!!!" to the driver in my journey.
6. Stay cool when your get out of the bus. There'll be so many pedestrians around you. Some girls (may I say "makcik") will come to you and offer body massage, face massage, foot massage, etc... some Indians/ Pakistani will come to you and give your their restaurants pamphlets, etc. At Tshim Sha Shui (Nathan Street), you'll see many European, Indian/Pakistani, Philippine, Indonesia/Malaysia, Japanese and Korean faces around you, not only Chinese. Walk through the Nathan Street following the bus direction. You'll find Maridor Mansion at the 58th. If you go straight to the front, you'll find Holiday Inn (one block further), then the Chung-King Mansion. Head into Maridor Mansion entrance, lift is to your right after passing 3-4 shops at the entrance. For my hostel, I've to go to the 13th floor where the hostel counter is (just in-front of the lift). The "nyonya" there is quite "baik la jugak", explaining me simple things not only about my room, but also about the building itself (the lift you used to enter the building just now is unusable from 8PM to 6AM, you've to use another lift at the back which is equipped with CCTV camera for security).
7. Be happy with your room, as that's the cheapest you can get at the BEST located area in Hong Kong!!! Instead keeping yourself in the room, go outside and watch & feel Hong Kong city. Go walking along Nathan Street for cheap bargains, or Kings Street for good meals!
8. I took subway from Tsim Sha Shui station (subway entrance is joust around the Mirador Mansion) to Mong Kok. At first, I'm not sure which exit should I go for, but after strolling around, I think exit heading to Girls Street (not sure/remember the name in English though) is the best one. I' not sure whether they really sell girls for pleasure, but you'll see stalls selling everything (from HK t-shirts to lingerie) just along the street! I bought Hong Kong 100% cotton t-shirt for my friend in Japan and for myself just for HKD25 dollar each here. They'll put HKD35-40 per piece, but its your time to bargain. Normally, you can get nearly half the advertised price. There're also many shops selling home electronics, computers, and cellphones around.
9. To go back to the airport, take A21 CitiFlyer airport bus at the bus stop just at the opposite side of the Mirador Mansion. The bus would take 40-50 minutes to the airport, so plan your time properly. For my case, I take bus at Mirador Mansion at 1PM for my flight at 4:30PM, and the timing is just nice. I waited for nearly 40 minutes for Cathay Pacific flight check-in at counter C (economy class ticket). Immigration clearance didn't take long time though.

The flight journey from Hong Kong to Nagoya was very nice. I got a cute Japanese girl travelling alone from Australia just next to my seat. We just chat along the journey until the plane landed in Nagoya Centrair International Airport. How come the stewardess misunderstood us as couple along the journey... hmmm, I won't elaborate on that though... <^-^>

Good news from the opposite side of the globe...

Actually, I'm now at my hometown in Kuala Terengganu for a short break. I'm not really happy to take a break at this challenging moment in my research, but this is the only moment that I would be able to "take a Kit-Kat" (reads: take a break). And, it's extremely short... just 5 days to go and return to a place a quarter distance of the globe! I'm quite used to this kind of life, maybe.

Semalam, bila berjaya akses ke wireless internet kat rumah nih (Ust_Kor_Hotspotz), ada berita gumbira...

Alhamdulillah, the abstract I submitted last January for MRS International Materials Research Conference in Chongqing, China has been ACCEPTED! Alhamdulillah, syukur ke hadrat Ilahi. This would be a great start for my international debut <^-^>


Abstract Status
DocumentID/ControlID: (ControlID was removed from public eyes for security reason)
Title: Growth of InGaN-based Laser Diode Structure on Silicon (111) Substrate.
Paper Number: D3.33;
Presentation Date: June 09, 2008
Presentation Time: 05:30 PM to 08:00 PM
Presentation Type: Poster
Room: Exhibit Hall
Status: Accepted

The paper has already been confirmed.
Presenting: True
Confirmation Date: March 20, 2008 at 03:42
Confirmed By: (Name was removed for security reason)

And, the journey goes on...

Tsunami Perubahan Politik di Malaysia: Tahniah Semua Rakyat Malaysia

Alhamdulillah, Pilihanraya Umum ke-12 Malaysia berjalan dengan baik pada keseluruhannya pada 8 Mac 2008 semalam. Selain insiden di Rusila (Marang, Terengganu), rakyat Malaysia keluar mengundi dengan aman, dan berdasarkan analisis, "Pengundi yang keluar mengundi seperti sudah yakin dengan calon pilihan mereka".

Walaupun berada jauh di perantauan, Alhamdulillah, akses ke media utama seperti Utusan, TV3 dan TV1, dan media alternatif seperti MalaysiaKini, Malaysia-Today selain halaman berita parti politik seperti HarakahDaily dan DAP memberikan peluang kpd saya utk sama-sama mengikuti perkembangan di Malaysia.

Sebelum pilihanraya, walaupun media utama menyifatkan bahawa BN mampu menang mudah 2/3 majoriti parlimen dan memegang semua Kelantan, namun media alternatif rata-rata yakin bahawa perkara sebaliknya akan berlaku. Rakan-rakan rakyat Malaysia di Jepun yang terdiri drpd kalangan pelajar dan pekerja juga banyak meramalkan perkara yang sama dan menganggap pilihanraya kali ini adalah sesuatu yang perlu diberi perhatian. Saya dan beberapa sahabat lain mengikuti pengumuman keputusan pilihanraya di TV3 dan MalaysiaKini sepanjang malam semalam sehingga ke Subuh pagi tadi.

Alhamdulillah, seperti yang diramalkan semua, Barisan Rakyat/ Alternatif berjaya mengaut kemenangan yang sangat besar, menjadikan Barisan Nasional kalah besar, dengan keputusan paling buruk sejak kemerdekaan 50 tahun lalu. BN bukan sahaja gagal mendapat 2/3 parlimen, malah gagal mendapat majoriti di Kelantan, Pulau Pinang, Kedah, Selangor dan Perak. Walaubagaimanapun, BN berjaya mengekalkan penguasaannya die Terengganu. Johor yang merupakan kubu kuat BN juga sudah berjaya dipecahkan oleh pembangkang yang berjaya menawan 6 kerusi (negeri dan parlimen). Setakat blog ini ditulis, PAS mengekalkan kerajaannya di Kelantan, DAP dan PKR bersetuju untuk menubuhkan kerajaan di Pulau Pinang, PKR dan PAS bersetuju di Kedah, dan campuran ketiga-tiga parti PKR, DAP dan PAS di Selangor dan Perak. (*Maklumat ini mungkin berubah selepas ini bergantung kpd pakatan dan usaha-sama setiap parti yang menang).

Sebagai seorang yang berpandangan independent, saya melihat punca kekalahan BN adalah seperti berikut:
1. Pembatalan dakwat kekal pada jari/kuku pada hari yang sangat dekat dengan pilihanraya menyebabkan rakyat hilang keyakinan kepada kerajaan yang sepatutnya menjaga hak rakyat dan proses demokrasi negara.
2. Sikap angkuh dan dolak-dalih pengarah SPR pada semua sidang media beliau menyebabkan rakyat muak dengan kepimpinan negara.
3. Kewujudan budak hingusan Khairy Jamaludin (KJ) dalam politik Malaysia yang naik dengan tiket Abdullah Badawi, yang banyak mencampuri urusan pentadbiran kerajaan.
4. Kepimpinan yang SANGAT LEMAH dari Abdullah Badawi sendiri menyebabkan rakyat bukan sahaja hilang keyakinan kepada kerajaan, malah risau dengan hala-tuju dan masa depan negara Malaysia.
5. Teguran dari mantan perdana menteri Tun Mahathir sendiri terhadap pentadbiran Abdullah membuktikan kelemahan kerajaan beliau, dan merupakan faktor penting perubahan pemikiran rakyat Malaysia secara umumnya.
6. Dasar kerajaan Abdullah yang bukan sahaja tidak konsisten, malah dilihat sebagai membahayakan masa depan Malaysia sendiri. Pembatalan "jambatan-bengkok" di Selat Tebrau ketika dalam pembinaan, dan pewujudan WPI di Selatan Johor yang memberikan banyak faedah kepada Singapura disamping menidakkan hak Malaysia. Rakyat Malaysia juga dilihat seperti deperbodohkan dalam semua pengumuman kerajaan berhubung "jambatan-bengkok" di Selat Tebrau.
7. Kegagalan Abdullah Badawi mengawal harga petrol dengan bijak, sehingga menyebabkan kenaikan harga barang keperluan lain.
8. Kerajaan pimpinan Abdullah Badawi cuba menipu rakyat Malaysia bahawa ekonomi Malaysia berada pada keadaan yang baik dengan menjadikan Indeks Komposit BSKL, kekuatan Ringgit, dan KDNK/GDP sebagai pengukur. Walhal, hampir semua rakyat Malaysia yang bertarung dalam dunia perniagaan sedar bahawa ekonomi Malaysia bukanlah pada tahap yang baik. Kadar inflasi Malaysia tidak pernah dijadikan berita di mana-mana media utama tempatan. Rakyat Malaysia yang tahu membaca dan sedar, faham bahawa kekuatan Ringgit dan kenaikan BSKL adalah disebabkan kemasukan dana pelaburan asing ke pasaran Malaysia akibat jangkaan kemerosotan ekonomi Amerika Syarikat (USA) yg menyebabkan syarikat pelaburan dan fund di seluruh dunia beralih ke Asia, bukanlah dijana daripada dalam negara. Media tempatan tidak pernah membuat perbandingan akonomi Malaysia dengan negara jirannya seperti Singapura dan Thailand, yang mempunyai pertumbuhan yang lebih baik hasil kemasukan dana asing ke Asia.
9. Perpindahan banyak syarikat multi-nasional dari Malaysia ke China membuktikan Abdullah gagal menjadikan Malaysia sebagai pasaran yang dinamik jika dilihat secara global.
10. Skandal membabitkan Koh Tsu Koon dan Motorola membuktikan kerajaan Barisan Nasional cuba menipu dan memperbodohkan rakyat Malaysia. DAP yang memainkan isu ini menyebabkan banyak undi di Pulau Pinang memihak kepada mereka.
11. Tahap keselamatan di bandar besar seluruh negara yang semakin buruk dan kegagalan kerajaan menagani perkara ini. Banyak kes bunuh dan rogol gagal deselesaikan PDRM. Kes di kalangan kanak-kanak menjadikan rakyat Malaysia risau dengan masa depan anak mereka.
12. Gejala sosial yang semakin buruk di kalangan remaja Malaysia, yang gagal ditangani BN. Pemuda BN sendiri dicop sebagai mat rempit (mungkin KJ adalah ketuanya) oleh pembangkang. Ini menyebabkan pengundi 'lari' drpd BN.
13. Kewujudan media alternatif yang banyak seperti MalaysiaKini dan Malaysia-Today, disamping blog-blog seperti JeffOoi yang banyak mendedahkan kelemahan kerajaan.
14. Media utama yang dikuasai BN gagal memberikan penjelasan mayakinkan berhubung banyak isu yang diutarakan pembangkang dan media alternatif.
15. Kebanjiran begitu banyak golongan pengundi muda yang celik IT, yang sebenarnya lebih bijak kerana golongan ini akan membandingkan laporan berita media utama tempatan dengan laporan di internet, selain media antarabangsa.
16. Sikap kerajaan pimpinan Abdullah Badawi yang tidak menunjukkan perubahan, walaupun banyak diasak oleh pembangkang dan rakyat Malaysia secara umumnya.
17. Kronisme semakin berleluasa. Lebih buruk lagi, politik kekeluargaan di bawah pimpinan Abdullah mengecewakan rakyat.
18. Kerajaan Abdullah gagal mendengar luahan bangsa India melalui HINDRAF. Sebaliknya, HINDRAF dianggap sebagai gerakan teroris. Keadaan ini menghampakan kaum India, dan digunakan sepenuhnya oleh pembangkang menyebabkan pengundi India dan Cina lari kepada pembangkang.
19. MCA, MIC dan Gerakan yang merupakan parti komponen BN gagal menyuarakan suara bangsa Cina dan India di parlimen. Ini menyebabkan mereka beralih kepada DAP dan PKR yang dilihat lebih meyakinkan dan berkaliber.
.... dan seterusnya.

Tahniah Barisan Rakyat/ Alternatif. BN perlu berubah untuk memenangi kembali hati rakyat terutamanya golongan muda yang bakal memimpin Malaysia. Sekian.

Just found this on the net...

People are often unreasonable, illogical and self centred;
Forgive them anyway.
If you are kind, people may accuse you of selfish, ulterior motives;
Be kind anyway.
If you are successful, you will win some false friends and true enemies;
Succeed anyway.
If you are honest and frank, they may cheat you;
Be forthright anyway.
What you spent years building, they may destroy overnight;
Build anyway.
The good you do today, they often will forget tomorrow;
Do good anyway.
Give the world the best you have, and it will never be enough;
Give the world the best youve got anyway.
You see, in the final analysis, it is between you and GOD;
It was never between you and them, Anyway.

Bypass and Disable Genuine Windows Validation Check

As detailed in Bypass Windows Genuine Advantage Validation Check in Windows Update, Microsoft has made it harder for illegitimate, or for whatever reason, your copy of Microsoft Windows couldn’t be validated, users to retrieve updates via Microsoft Updates or Windows Update, and download programs from Microsoft Download Center.

If you just want to download and apply critical updates to your system, you will be still able to do that without any hack and crack. Just set your Windows’ Automatic Updates (found in Control Panel) setting to Automatic, and let Windows does the updating job in the background. The downside is, it won’t get for you the optional updates.

If you want to download optional components from Windows Update, or simply want to download Windows Defender, Windows Media Player 10, Photo Story 3, DirectX 9 and other application softwares from Microsoft Download Center that require WGA validation tool, you will need to apply a easy and safe hack to bypass the checking.

Open Windows Explorer by clicking Start -> All Programs -> Accessories -> Windows Explorer.
Browse to C:\Documents and Settings\All Users\Application Data\Windows Genuine Advantage\data folder.
Delete (or backup or move to another folder, if you want) data.dat file.
Create a new empty data.dat: You can create a new text file by (make sure you are at the right folder at above) clicking File -> New -> Text Document or right clicking on Windows Explorer window then click New -> Text Document. Then, either rename the file to data.dat. The original .txt extention of the text file need to be changed too. You can disable the hiding of extension of known file types, or follow the following steps to create a new file out of the text file:
Open the text document you just created.
Click on File -> Save As.
Change the Save as type to “All Files”.
In the File name, type data.dat
Click Save.
Go back to the Windows Explorer, at folder C:\Documents and Settings\All Users\Application Data\Windows Genuine Advantage\data, check that data.dat exists.
Delete the text file you created previously.
Set the attributes of data.dat to Hidden and Read-Only. Attributes can be set by right click on the data.dat file, and then click on Properties.
Windows Genuine Advantage (WGA) validation check has been disabled.
Note: The data.dat that are replacing the original data.dat can be blank text file or empty, or you may type whatever you want there.

With this hack (or crack if you want), Windows WGA piracy check will be bypassed and you can now download software from Download Center or apply updates from Microsoft/Windows Updates.

Source: http://www.mydigitallife.info/2006/03/07/bypass-and-disable-genuine-windows-validation-check/

Non-stop 3 day clean room process... ngantuk!

Alhamdulillah... baru jer abis xperiment aku utk Ni/Au/Au(cap)... 3 hari tak stop... esok Insya'Allah buat measurement. Nak wat ari nih dah tak larat... dah penat & ngantuk nih. 3 hari... more than 15 hours of work and less than 6 hours sleep, OK la jugak kan. Tp laporrrrrrr!!! Ntah ape la aku makan, telan roti sapu kaya yg Ma bagi bawak bekal gi Shanghai ari tu jer.

Mlm tadi gi makan kat Tenki, tak larat dah nak masak... lagipun kalu aku masak, rugi 2 jam masa, baik guna utk tido. Ntah mlm tadi aku tido kol 10-1 jer kot. Kucai kejut awal sgt aa... aku cek timer rupanya kol 2 baru jadik 8 jam utk vacuum pumping utk evaporation beam deposition kat clean room nih. Mandi + semayang subuh pagi tadi, kol 4 pagi aku bertolak... gi pulangkan dvd kat Tsutaya dulu sbelum dtg lab... switch ON main power EB at 4:30AM... siap Au deposion at 5:45AM, then masuk acetone for lift-off. Siap boleh bet kat eBay lagi pagi tadi sementara nunggu acetone@55 deg C (30 min). Lift off cam ok sket dari Ni/Au sebelum nih, tp senang sgt tercabut. Patut kurangkan mase utk acetone immersion kot. Takpun ubah surface treatment before Au deposition. Air and N2 ambient annealing done simultaneously, everyhing was OK.

Okay la... dah jadik xperiment report plak... kepala pk pasal mende tu jer. Stat from esok dah kena concentrate on LD process pulak, sensei & Hao san dah stat bunyi dah tu. Ya Allah... moga2 electrode nih berjaya dpt Ohmic with the lowest specific contact resistance ever, to enable lasing... Insya'Allah.

Bye dulu, nak semayang Zohor & makan roti plak... nnt pegi jejalan Osu/ Sakae aa jap... this is the only holiday I've for this weekend... tinggal 4-6 jam jer lagi. Wassalam.

Alhamdulillah... syukur...

Pagi tadi Alhamdulillah dah settle presentation kelas Egawa sensei, tak la teruk sgt. Kat Ebers-Moll modell tu ok aa... semua equations boleh disettlekan. Tak percaya pulak aku... start dari awal kelas die, mase abis Emers-Moll tu dah kol 11:45... 5 min jer lagi tinggal mase. Egawa tanyer aa boleh abis ke tak nih, aku cakap ok kot... tp mmg tak sempat aa. Pasal Emitter Efficiency tu... aku dah blank dah... kurang persediaan kot pasal tu. Lepas tu, die cakap sambung minggu depan aa pulok. Aku ok jer, boleh prepare lebih sket.

Lepas Zohor & makan ngan Kucai, Kutu, Zam, Pejal n Mokh... aku ajak Orioka buat I-V and TLM meas. Alhamdulillah... syukur sungguh! VERY GOOD RESULT for my p-GaN Ni/Au electrode, guna aku nyer surface treatment procedure. Alhamdulillah... usaha tak tido malam & bangun pagi2 tak tentu masa pegi skolah sejak-2-menjak nih. Process utk nih baru jer stat sabtu lepas (RIE/ activation anneal), Ahad cuti, Isnin (surface cleaning/ TLM).. sampai load dlm evaporation chamber kol 12 mlm tu. Pgi Selase aku dtg kol 7, metal evaporation sampai kol 8:30 tu, then gi kelas sampai kol 12. Kol 1 gitu stat ngan Orioka buat annealing. Ari nih lepas presentation tadi buat meas tu... Alhamdulillah...

Good motivation for further investigation in surface treatment method... wassalam.

Just trying to make picture collage using picasa

Kereta oh kereta...

Alhamdulillah... kereta dah pun jadik murah sket. Dah dpt potongan 25% drpd harga sebelum nih.

Shuhaimi (CR-V) RM23,000=>RM17,000
Hafiz (Evo 6) RM48,000=>RM37,000
Anwar (Stream) RM34,000=>RM25,000

Insya'Allah esok boleh kuwar kot... Insya'Allah.

C.I.N.T.A

"Yang terjadi biar saja terjadi...

Bagaimanapun hidup memang hanya cerita...

Cerita tentang meninggalkan dengan yang ditinggalkan..."

Cinta

by Melly Goeslow feat Kris Dayanti

Menatap jalan yang menjauh
Tentukan arah yg ku mau
Tempatkan aku pada satu peristiwa
Yang membuat hati lara

Di dekat engkau aku tenang
Sendu matamu penuh tanya
Misteri hidup akankah menghilang?
Dan bahagia di akhir cerita

Cinta tegarkan hatiku
Tak mau sesuatu merenggut engkau
Naluriku berkata tak ingin terulang lagi
Kehilangan cinta hati bagai raga tak bernyawa
Aku junjung petuamu
Cintai dia yg mencintaiku
Hati yang dulu belayar kini telah menepi
Bukankah hidup kita akhirnya harus bahagia

Di dekat engkau aku tenang
Sendu matamu penuh tanya
Misteri hidup akankah menghilang?
Dan bahagia di akhir cerita

Cinta tegarkan hatiku
Tak mau sesuatu merenggut engkau
Naluriku berkata tak ingin terulang lagi
Kehilangan cinta hati bagai raga tak bernyawa

Aku junjung petuamu
Cintai dia yg mencintaiku
Hati yang dulu belayar kini telah menepi
Bukankah hidup kita akhirnya harus bahagia

Cinta biar saja ada
Yang terjadi biar saja terjadi
Bagaimanapun hidup memang hanya cerita
Cerita tentang meninggalkan dengan yang ditinggalkan

Cinta...

Changing the MAC Address in W2K and XP

Changing the MAC address in W2K and XP

(This page stolen from http://www.klcconsulting.net/change_mac_w2k.htm
because I wanted a copy in my notes here so I wouldn't lose it.)

Method 1:

This is depending on the type of Network Interface Card (NIC) you have. If
you have a card that doesn't support Clone MAC address, then you have to go to
second method.

1. Goto Start->Settings->Control Panel and double click on Network and
   Dial-up Connections.
   

2. Right click on the NIC you want to change the MAC address and click on
   properties.
   

3. Under"General" tab, click on the "Configure" button.
   

4. Clickon "Advanced" tab.
   

5. Under "Property section" you should see an item called "Network Address" or "Locally Administered Address", click on it.
   

6. On the right side, under "Value" type in the New MAC address you want to
   assign to your NIC. Usually this value is entered without the "-" between the MAC address numbers.
   

7. Go to command prompt and type in "ipconfig /all" or "net config rdr" to
   verify the changes. If the changes are not materialized, then use the second method.
   

8. If successful, reboot your systems.
   

Method 2:

This method requires some knowledge on the Windows Registry. If you are not familiar with Windows Registry, just use the SMAC tool to change the MAC addresses, or consult with a technical person before you attempt on the following steps. Also, make sure you have a good backup of your registry.

a. Goto command prompt and type "ipconfig /all" and

I. Record the Description for the NIC you want to change.

II. Record the Physical Address for the NIC you want to change.
Physical Address is the MAC Address

Figure 1.

b. Goto command prompt and type "net config rdr" and you should see
something like

Figure 2.

c. Remember the number between the long number (GUID) inside the { }.
For example, in the above "net config rdr" output, for MAC address
"0C095ECB793", you should remember {1C9324AD-ADB7-4920-B02D-AB281838637A}. You can copy and paste it to the Notepad, that's probably the easiest way. (See figure 2.)

d. Go to Start -> Run, type "regedt32" to start registry editor.
Do not use "Regedit".

e. Do a BACKUP of your registry in case you screw up the following steps.
To do this

I. Click
on "HEY_LOCAL_MACHINE on Local Machine" sub-window

II. Click
on the root key "KEY_LOCAL_MACHINE".

III. Click
on the drop-down menu "Registry -> Save Subtree As" and save the backup
registry in to a file. Keep this file in a safe place.

f. Go to "KEY_LOCAL_MACHINE\SYSTEMCurrentControlSet\Control\Class{4D36E972-E325-11CE-BFC1-
08002BE10318}. Double click on it to expand the tree. The
subkeys are 4-digit numbers, which represent particular network adapters. You should see it starts with 0000, then 0001, 0002, 0003 and so
on. (See figure 3.)

Figure 3.

g. Go through each subkey that starts with 0000. Click on 0000, check DriverDesc
keyword on the right to see if that's the NIC you want to change the MAC
address. The DriveDesc should match the Description you
recorded from step (a.-I.). If you are not 100% sure about the DriverDesc,
then you can verify by checking if the NetCfgInstanceID keyword value
matches the GUID from step (c).

If there is no match, then move on to 0001, 0002, 0003, and so on, until you
find the one you want. Usually 0000 contains the first NIC you
installed on the computer.

In this demonstration, 0000 is the NIC I selected. (See figure 3.)

h. Once you selected the subkey (i.e. 0000), check if there is a keyword "NetworkAddress" exist in the right side of the window. (See figure 3.)

I. If "NetworkAddress" keyword does not exist, then create this new keyword:

i. Click on the drop down menu "Edit -> Add Value".

ii. In the Add Value window, enter the following value then click OK. (See figure 4.)

Value Name: = NetworkAddress

Data Type: = REG_SZ

Figure 4.

iii. String Editor window will pop up at this time (see figure
5.)

iv. Enter the new MAC address you want to modify. Then click OK.

(There should not be any "-" in this address. Your entry should only consist of 12 digits as seen in the figure 5.)

II. If "NetworkAddress" keyword exists, make sure it shows the
keyword type is REG_SZ, and it should show as NetworkAddress:REG_SZ: .
This keyword might not have a value at this time.

i. Double click on the keyword NetworkAddress
and the String Editor window will pop up. (See Figure 5.)

ii. Enter the new MAC address you want to modify. Then click OK.

(There should not be any "-" in this address. Your entry should only consist of 12 digits as seen in the figure 5.)

Figure 5.

j. There are 2 ways to make the new MAC address active. Method I does
not require a system reboot:

I. Goto Start->Setting->Control Panel, and double click on
"Network Neighborhood".

WARNING: Make sure you understand that you WILL lose the
network connection after completing step "ii." below, and if you have a DHCP client, you will get a new IP address after completing step "iii."

i. Select the Network Adaptor you just changed the MAC address.

ii. Right click on the selected Network Adaptor and click "Disable."

Verify the status column for this adaptor changes to "Disabled"

iii. Right click on the selected Network Adaptor and click "Enable."

Verify the status column for this adaptor changes to "Enabled"

iv. If for any reason it cannot be disabled or re-enabled, you have to reboot your system to make the changes effective.

II. Reboot your Windows system.

k. Once completing step j (if rebooting the system, wait until the reboot is
completed), go to command prompt, type "ipconfig /all" to confirm
the new MAC address.

Restore The TRUE Hardware burned-in MAC Address:

1. Remove the entry you added:

1. If you followed Method 1, then go back to the advanced properties window and remove the entry you add.

2. If you followed Method 2, then remove the "NetworkAddress" keyword you added in the registry.
   

2. Usestep (j) above to activate the change you make.

3. Once rebooted, go to command prompt, type "ipconfig /all" to confirm
   the original MAC address.
   

If MAC Address changes does not work:

If for whatever reason the MAC address cannot be changed using method 2, make sure you restore the registry setting by following the "Restore The TRUE Hardware burned-in MAC Address" instruction above. If necessary, restore the registry you just backed-up to get your system back to the original state. You can do this by clicking on the drop-down menu "Registry->Restore", and restore your backup registry file.

or use SMAC.

Dari pagi berlari sampai malam

Nih la idup... pagi bangun tido, terus bergegas dtg lab... awal gak pagi tadi, kol 8 sampai skolah. Plan semalam nak dtg kol 6-7 pagi, tp terbangun lambat aa... 7:02AM baru terbangun... nih kes tutup jam loceng nyer pasal aa nih.

Sampai skolah, 8:10 dah masuk clean room, buat HCl etching utk sample aku 2 ari lepas. Then load dlm evaporation beam chamber for Al deposition. Berpusing kepala, tangan ngan kaki nak kejar mase nyer pasal... kol 8:05AM (jam clean room) abis setting, terus berlari keluar pegi lecture hall utk kelas Yamamoto sensei. Alhamdulillah la jugak sbb partner Jepun duk sebelah best la jugak... Yonaha pun ade kat depan jer, so taklah cuak sgt cam kelas first time last week. Jepun tu pun baik jer ajar aku... kelas nyer kerja pun tak teruk sgt hari nih... kire menarik aa jugak.

Abis kelas, berlari balik lab... Takashima n Orioka dah pun ada tunggu aku, BAGUS!!! "Kol 11 nnt kite stat", aku kate kat diorang aa nih. Then, stat la kerja aku... dari deposition Al, lift-off sampai RTA annealing. Lepas diorang balik dlm kol 5:30 PM tadi, aku sambung lagi photolithography dan sekarang nih tgh vacum utk Ni/Au deposition. Lama gak nunggu nih... dlm 90 ke 120 min. Makan aa megi dulu, ntah satu hape tak telan lagi hari nih... kebulur betul aku nih!

Hmm... pasal scholarship, aku dah jumpa dah Mr Yamaguchi (Foreign Student Office) siang tadi, memacam die tanyer aku pasal visa ari tu... scholar pun banyak die tanyer. Aku skarang nih jadik private student katenyer. Pasal JPA x approve lagi scholarship aku pun die dah tau... aku amik die nyer tel & fax number skali utk Husna (KUKUM) antar financial affidavit kat die nanti.

Okay aa dulu... makan & buat report electromagnetic nih sementara tunggu abis vacum. Bye & wassalam ;)

Xperiment lagi...

Huh... lama sungguh dok tulih blog nih. Nih sesaje bosan sambil makan meggi kat lab nih, tulih aa kejap. Pendape aa nok tulih nih... hmm... ari nih cam biase aa buat xperimen. Ingat tadi nak balik jer skali ngan Orioka (B4) lepas ajar die cara guna thermal resistance annealing, tp pk pk balik... baik aku terus buat photolithography utk TLM patterning. So, jimat sket masa utk esok. Abis semua TLM patterning malam nih utk 9 keping sample tu, esok tgh hari boleh start vacumm utk Al deposition. Abis kelas Opto-electronic kol 2:30PM tu, boleh deposit, then dlm kol 4:30 gitu dah boleh buat RTA anneal. Tp aku blank nih... nak anneal esok ker, lusa sbb lepas anneal tu kena teruskan xperiment tu dlm masa 6 jam tanpa henti utk elakkan sample tu rosak. Hmmm... peninn gak nih. Okay aa dulu, sambung lagi lain kali... abis dah mase nih.

Test

Test after updating to new domain

Final Year Research Presentation

Alhamdulillah... usaha sbg undergraduate student selama 4 tahun kat Nagoya Institute of Technology nih dah sampai ke penghujung. Petang tadi dah siap dah presentation utk ECE (Electrical and Computer Eng.) Department. Ntah camane ntah... mase present tu ade sangkut2 sket sbb terlupa plak sket2 permulaan ayat. Ade la dlm 2-3 saat gak kot setiap kali sangkut, so terpaksa la aku goreng sket, tp goreng dlm bahase Jepun nih bukanlah sama cam goreng dlm bahase Melayu or English... goreng pun susah la jugak sbb takut tak bersambung ngan point lepas tu. Tp ok la ayat2 yg aku goreng sket2 tu... ntah camane la boleh lupa ekk. Cuak nyer pasal aa nih. Tp takpe la... secara keseluruhannya ok la jugak, cuma aku jer tak puas hati ngan diri sendiri sbb Tsubota ok jer... mostly perfect. Satu gi mende alat remote control utk tukar slide kat tangan kiri aku tu asyk terskip slide jer, ampess gak aa sket. Tertolak kuat sgt kot die nyer punat tu, tp aku betulkan balik aa. Jadik cam nak test slide mase rehearsal pulak. Ntah ape2 la... mase rehearsal ari tu takde la pulak mende2 camnih. Hmm... sure cuak nyer pasal aa nih kot. Tp ape2 pon, ok aa kot. Sensei Arai tanyer pasal cukup ke tak 1.123 x 10*(-3) ohm cm*2 yg aku dapat stakat nih... so aku jawab jer la tak cukup lagi, sbb kalu boleh nak sampai 10*(-6). Egawa plak tanyer pasal lapping rate... tp sbb aku lupa, aku jawab aa aku tak kira lapping rate, tp diamond slurry lagi cepat dari SiC #4000... tu jer. Ampess gak aa jawapan aku tu... penat jer aku kira semua lapping rate ari tu, tp sbb lupa nyer pasal... terpaksa la aku jawab cam tu, buat jatuh imej jer. Sure Egawa ingat aku jenih tekitou jer buat jikken lepas nih, tp tak kisah la... kita tgk la hasil aku lepas nih!

Ochiyou, semua dah berakhir utk sementara waktu. Mat Rusop nyer sample kena buat mlm nih, tp die carik aku aku x de... aku carik die pulak die x de... aku gi party jer la dulu. Dah penat dah kepala otak nih. Ok la yek, bye & wassalam dulu.

Iftar di Masjid Nagoya

Alhamdulillah... abis gak akhirnya majlis buka posa kat masjid Nagoya jap tadi... yg bestnyer semua budak Malaysia mainkan peranan. Sbb makan ringan mase buka posa tu budak Malaysia yg buat, utk makan berat pulak org Indonesia yg buat. Aku sebagai pembeli air la... pengalaman sejak tahun lepas (tahun lepas nyer kopi ade 'nyukazai'... 300 ketul kena buang bagi sesajer jer kat Jepun).

Kali nih aku gi beli kat kedai sama gak cam tahun lepas yg kat Atsuta tu, pegi ngan Kucai mlm tadi (kol 7, tutup kol 8PM). Memula pakat nak ajak Zam ngan Kutu skali, tp sbb kol 7 suku baru nak tolak dari rumah aku... cancel aa, aku gi ngan Kucai jer.

Air yg dibeli: (utk rujukan tahun depan)
Jus Oren JPY38 x 150pcs
Jus Epal JPY38 x 150pcs
Air Mineral JPY128 x 24pcs

Lepas tu singgah kat Jusco Kanayama sbb kedai tu takde jual air dlm kotak... ingat nak beli kotak aa nih, tp sampai Jusco... mahal aa pullok yg jenih kotak. So, beli aa air berikut:
Dakara JPY198 x 4pcs
Lipton Tea JPY198 x 4pcs

Rasenyer air cam tak cukup... tp mase majlis tadi, Alhamdulillah... semuanya cukup. Siap lebih lagi air mineral tu 1 kotak (6 pieces), ... air2 lain yg dah dibuka tu pun ade gak aa lebih... tp mmg chodo ii la kot bilangan semer. BEST!!!

LD characteristics measurement...

Lama dah tak tulih blog kat sini.... tak sempat nak tulih sbb slalu balik malam jer sejak-2-menjak nih. Abis jikken dah tgh malam, dlm kepala just ingat nak balik rumah jer... malas dah nak lepak kat lab nih, walaupun duk depan kom nih... penat beb! Lapor lagi... makan sekali jer sehari sejak akhir2 nih. Tu pun kol doblas malam, lepas tungkus lumus masak... nak mandi lagi, semayang lagi, ngaji koran lagi... tgk tv tu... hmm... ntah sempat sambil kunyak makanan jer la.

Ari nih buat measurement utk LD yg buat minggu lepas (utk panar-structure jer). Tp, hmm... sedih... tak lase la jugak. Nyala jadik LED jer la nampaknya... spectrum pun tak ok... FWHM dlm 14 nm gitu aa. Teruk aa... tp ok 2 nm compared ngan LD yg dulu. I-L tak tunjukkan result best aa... tak lase masalahnyer. Maybe structure tak betul kot sbb yg nih planar-structure. Kol 4 lebih tadi stop aa... Ohta suh berenti aa... die pun dah penat sgt dah tu, mlm tadi tido kat lab lagi. Sian die... aku pun tanak cakap banyak aa ari nih, Ohta-KUN jer yg banyak cakap... tp Ohta-SAN cam penat aa... tak banyak buat lawak cak dulu2. Series jer... aku pun malas nak wak lawak.

Ok aa... nak gi semayang Asar plak nih... bukan selalu abis awal camnih. Boleh tgk matahari petang sket ari nih. Wassalam.

~suMMer tiMe~

~suMMer tiMe~: "The most destructive habit - Worry
The greatest joy - Giving
The greatest loss - Loss of self-respect

The most satisfying work - Helping others
The ugliest personality trait - Selfishness
The most endangered species - Dedicated leaders

Our greatest natural resource - Our youth
The greatest 'shot in the arm' - Encouragement
The greatest problem to overcome - Fear

The most effective sleeping pill - Peace of mind
The most crippling failure disease - Excuses
The most powerful force in life - Love

The most dangerous pariah - A gossiper
The world's most incredible computer - The brain
The worst thing to be without - Hope

The deadliest weapon - The tongue
The two most power-filled words - 'I Can'
The greatest asset - Faith

The most worthless emotion - Self-pity
The most beautiful attire - SMILE!
The most prized possession - Integrity

The most powerful channel of communication -Prayer
The most contagious spirit - Enthusiasm"